Shandong Winners Water Environment Technology Co., Ltd. is a technical enterprise specializing in the R&D, production, membrane application and engineering design of hollow fiber membrane separation technology. It boasts strong R&D capabilities and mature manufacturing processes. The company mainly produces and sells hollow fiber MBR membrane products made of polymer materials such as polyvinylidene fluoride (PVDF).
One-on-one service
Pick up by special car
Sincere Service

Product Introduction
The UPE material MBR flat membrane has excellent hygiene performance and chemical corrosion resistance, and is suitable for various complex water treatment environments. It is widely used in water purification treatment, municipal sewage, industrial wastewater treatment and other fields. Compared with traditional hollow fiber membranes and hard flat membranes, it has a higher cost performance.
UPE (Uitra High Molecular Weight Polyethylene) micro-porous membrane: It is fabricated by using high-purity PE raw materials with a molecular weight greater than 1 million daltons through TiPS phase separation and two-phase extreme stretching processes.
Technical Specifications
| Film thickness um | Gram weight 9/m2 | Average pore size nm | Maximum aperture nm | Porosity % | Contact angle | Tensile Strength MD(N) | Tensile Strength TD(N) | Elongation MD(%) | Elongation TD(%) | |
| EHSV9 | 88 | 32.6 | 47.4 | 68.7 | 61 | 41.4 | 47.7 | 33.7 | 63 | 105 |
| EHU10 | 81 | 31.4 | 79.1 | 130.1 | 59.2 | 54.3 | 42.1 | 32.6 | 64.8 | 28.8 |

Productoperating parameters
1.There is 1 setofmembrane module,witha total membrane area of800 m2.
2. The chemical cleaning adopts the static pressure reverse flushing method, with the pressure not exceeding 20 kpa.
3. The dosage of chemical cleaning reagents is configured at 6 L/m2.
4. The effective concentration of sodium hypochlorite used for chemical cleaning is ≤ 1000 ppm, and the concentration of citric acid is ≤ 1000 ppm.e)
5. Air supply volume: 0.15 - 0.3 m2/m2/h (depending on the operating conditions). This device requires an air supply volume of more than 3.5 m2/min.
6. Operation mode: 8 hours on, 2 hours off.
Performance Advantage 1

Low replacement cost:
1. Permanent use components: sealing ring, sealing ring,outer support plate, support frame, partition ring, collecting water pipe, etc.These components can bereusedforoverten years;
2. Consumables: diaphragm.See (Figure1)
Substitution versatility:
1. Square and rectangular structure.The length can be flexibly assembled according to the existing membrane frame size.The lightweight structure is easier to match different membrane frames, thereby eliminating the mismatch of different models of membranes during replacement.
2. Flexible length variation: Each component can be customized for the collecting water pipe according to actual needs, matching different sizes. See (Figure 2)
Performance Advantage 2:No sludge accumulation, no backwashing

+86 13021555074
No. 2085, Shunde Road, Zhucheng City, Shandong Province